MON-SAT: 11-7 | SUN: 11-5 | 888-686-7872
From Alexander Pedals:
The Litho Boost is based on the classic Pharaoh Amplifiers Class-A Boost pedal. The Class-A Boost was one of the original boutique boost pedals, with hundreds of dedicated users across the world. From time to time, Class-A Boost pedals have made their way back to our shop and we've been floored by just how great they sound! We started with the tried-and-true Class-A Boost circuit and then did absolutely nothing to it.
Volume - Controls the output volume of the boost. Crank it to overdrive your tube amp.
Contour - Set low for transparent and glassy boost. Or set it higher for fat and juicy boost. Your call.
Tone - Adjusts the high frequency content of the boosted signal. The "neutral" setting is around 2 o'clock.
The Litho Boost requires a 9V DC power supply with a 2.1mm pin, center negative. The Litho Boost is not designed to be powered on supplies higher than 9V and does not use a battery. The Litho Boost should work fine on a multi-pedal "daisy chain" connector, but if you encounter excessive noise or hum try a separate power supply. The Litho Boost requires approx. 12mA.
From Pedaltrain: Pedaltrain’s all-new Classic Series is rooted in the company’s best-selling pedal board models. Pedaltrain has incorporated design improvements that make these models better than ever. The Classic 2...
From Neat Knobs: One night at a gig John was using his bass synth pedal and the knob settings were accidentally bumped after some loose cords in his pedalboard case...
Wear Our Brand Try our American Apparel crewneck and you'll be feeling snug, comfy, and stylish.
The classic 'curly cable', the VCC has been part of some of the most historic moments in rock and roll history. A unique multi-gauge design uses individual conductor types that...
Subscribe to our email newsletter for all the latest gear news and updates.
© 2016 Chicago Music Exchange. All Rights Reserved. 3316 N. Lincoln Ave Chicago, IL 60657 (773) 525-7773.