MON-SAT: 11-7 | SUN: 11-5 | 888-686-7872
Reverend teamed up with country/roots-rock guitar legend and Grammy winning artist/producer Pete Anderson for their first hollowbody. Pete wanted a vintage look, but with upgraded performance that today's players would appreciate. The satin finish and vintage appointments project a low key "pawnshop prize" look that belies the guitar's high performance design... kind of like an old sleeper street rod with a hidden nitrous tank!
All the growl and twang you'd expect from a P-90 loaded hollowbody, but with key improvements:
UNI-BRACE: this is a new single brace structure that starts at the neck block and ends with a block under the bridge. It is the full depth of the body, but only about a 1/2 inch wide, and runs under the bass side of the body only. The Uni-Brace creates several advantages:
1) Divides the body which reduces internal air movement, greatly reducing uncontrollable feedback at stage volume.
2) Connects the bridge block to the neck block, greatly increasing sustain. This also increases structural integrity, preventing the neck from tilting upwards over time (a common problem with conventional hollowbodies).
3) Stiffens the bass side of the body, which reduces uncontrollable howling and increases clarity of the low strings.
4) Does all of the above, and still delivers classic full-hollow tone!
PLAYABILITY: the neck joins the body at the 15th fret for better high fret access.
TUNING STABILITY: The bridge is mounted directly to the top... no more sliding bridge base! The bridge uses low-friction roller saddles, and locking tuners are standard.
BASS CONTOUR: Like all Reverend guitars, this one features the Bass Contour control for on-the-fly versatility and tone tweaking.
Body: hollow uni-brace, laminated spruce top, laminated maple back/sides, bound f-holes, arched top/back, black top/back/sides with cream binding, 20" x 16-1/4" x 2-3/8"
Pickups: two Reverend P90's, output/tone calibrated for each position, hum cancelling when combined
Neck: glued-on, three-piece korina, 13 degree tilt-back headstock
Truss rod: dual-action, access at headstock
Fingerboard: rosewood, 12" radius, single-layer binding, pearloid block inlays
Frets: 22 medium jumbo
Neck profile: medium oval
Nut: 1-11/16" (42.86 mm) width, graphite
Tuners: Reverend pin-lock tuners
Bridge: TOM with roller saddles and Bigsby B70 tremolo
Controls: custom volume and tone, bass contour, 3-way
Features of the cable include 24AWG wiring, foil shielding and cloth-wrapped Jacket to guarantee crystal clear tone and a long life of use and abuse.
The TV Jones SuperÕTron is a replica of the original early 1960Õs prototype design. It is very similar to the TV Classic, but with steel blades instead of pole screws....
The Ibanez TS9 Tube Screamer is a reissue that's just like the original in so many ways. Same housing, same famous seasick-green paint, and the same crankin' overdrive that made...
One of the really nice things about Fender® instruments is that you can change the look of your instrument with relative ease. One of the easiest ways to accomplish this...
Subscribe to our email newsletter for all the latest gear news and updates.
© 2015 Chicago Music Exchange. All Rights Reserved. 3316 N. Lincoln Ave Chicago, IL 60657 (773) 525-7773.