My shopping cart
Your cart is currently empty.
Continue ShoppingWarm Audio Foxy Tone Box Fuzz Pedal
Warm Audio Foxy Tone Box Fuzz Pedal
Brand New
- $149.00
UNAVAILABLE
Brand New
- $149.00
UNAVAILABLE
The new Foxy Tone Box from Warm Audio is a hyper-accurate recreation of one of the most sought-after and beloved fuzz pedals of all time - used in the early seventies by legendary tone masters Billy Gibbons and Peter Frampton, and in the present day by folks like Adrian Belew, Nine Inch Nails and Beck. Covered in thick velvet just like the vintage pedal, the Warm Audio Foxy Tone Box faithfully recreates the vintage circuit and brings you the huge tone, octave-up sounds and look of the original…without having to pay crazy vintage prices!
The specific components used in a pedal circuit are critical to the way that it sounds and reacts to your playing, so each Foxy Tone Box is assembled by hand using premium parts. We searched far and wide for a stash of the correct NOS (“New Old Stock”) Fairchild transistors used in the original—and then paired them with germanium diodes, high-watt carbon resistors, and film capacitors to bring the fury of the vintage pedal to the present day. It’s true bypass, and it sounds like nothing else on earth!
Just like the original, the Foxy Tone Box features controls for Volume, Sustain, and Fuzz (from “Mellow” to “Brite”), along with a switch to engage the pronounced octave effect. From mellow and subdued crunch to all-out searing fuzz and everything in between, this pedal is a virtual library of dirt encased in orange velvet!
To get started, keep the Octave switch off and roll the Fuzz to the “Mellow” side for warm, square-wave distortion. Then engage the Octave effect, crank the Fuzz to “Brite", and increase the Sustain for maxed-out, hyper-compressed tones that are barely hanging on for dear life! Electric guitar is the obvious application, but try it on synthesizers, drum machines, bass, acoustic/electric, and more. If you can plug a cable into it, the Foxy Tone Box can add character you just can’t get anywhere else.
The specific components used in a pedal circuit are critical to the way that it sounds and reacts to your playing, so each Foxy Tone Box is assembled by hand using premium parts. We searched far and wide for a stash of the correct NOS (“New Old Stock”) Fairchild transistors used in the original—and then paired them with germanium diodes, high-watt carbon resistors, and film capacitors to bring the fury of the vintage pedal to the present day. It’s true bypass, and it sounds like nothing else on earth!
Just like the original, the Foxy Tone Box features controls for Volume, Sustain, and Fuzz (from “Mellow” to “Brite”), along with a switch to engage the pronounced octave effect. From mellow and subdued crunch to all-out searing fuzz and everything in between, this pedal is a virtual library of dirt encased in orange velvet!
To get started, keep the Octave switch off and roll the Fuzz to the “Mellow” side for warm, square-wave distortion. Then engage the Octave effect, crank the Fuzz to “Brite", and increase the Sustain for maxed-out, hyper-compressed tones that are barely hanging on for dear life! Electric guitar is the obvious application, but try it on synthesizers, drum machines, bass, acoustic/electric, and more. If you can plug a cable into it, the Foxy Tone Box can add character you just can’t get anywhere else.
- FAITHFUL RECREATION OF THE ORIGINAL “FOXY” FUZZ CIRCUIT WITH 100% ANALOG, FULLY DISCRETE SIGNAL PATH
- PREMIUM COMPONENTS USED THROUGHOUT, INCLUDING THE NOS 2N3565 FAIRCHILD TRANSISTORS FOUND IN THE ORIGINAL CIRCUIT
- USES CARBON RESISTORS, GERMANIUM 1N34A DIODES, AND PREMIUM FILM CAPACITORS
- TRUE BYPASS OPERATION
- GOLD-PLATED PCB PADS
- VOLUME, SUSTAIN, AND FUZZ KNOBS
- OCTAVE SUSTAIN SWITCH FOR ENGAGING THE OCTAVE-UP EFFECT
- 1/4" INPUT (INST) AND OUTPUT (AMP) JACKS
- RED LED POWER INDICATOR
- GROOVY VINTAGE ENCLOSURE COVERED IN ORANGE VELVET
- POWERED BY 9V BATTERY OR STANDARD 9V DC PEDAL ADAPTER (2.1MM, CENTER NEGATIVE DC ADAPTER INCLUDED)
- POWER CONSUMPTION: 1.5MA
- WIDTH: 6.5"
- DEPTH: 3.75"
- HEIGHT: 1.5"
- WEIGHT: 1.4 LBS
Have a Question for Our Experts about Pricing?
- Brand: Warm Audio
- UPC: 850016400543
Description & Specs
The new Foxy Tone Box from Warm Audio is a hyper-accurate recreation of one of the most sought-after and beloved fuzz pedals of all time - used in the early seventies by legendary tone masters Billy Gibbons and Peter Frampton, and in the present day by folks like Adrian Belew, Nine Inch Nails and Beck. Covered in thick velvet just like the vintage pedal, the Warm Audio Foxy Tone Box faithfully recreates the vintage circuit and brings you the huge tone, octave-up sounds and look of the original…without having to pay crazy vintage prices!The specific components used in a pedal circuit are critical to the way that it sounds and reacts to your playing, so each Foxy Tone Box is assembled by hand using premium parts. We searched far and wide for a stash of the correct NOS (“New Old Stock”) Fairchild transistors used in the original—and then paired them with germanium diodes, high-watt carbon resistors, and film capacitors to bring the fury of the vintage pedal to the present day. It’s true bypass, and it sounds like nothing else on earth!
Just like the original, the Foxy Tone Box features controls for Volume, Sustain, and Fuzz (from “Mellow” to “Brite”), along with a switch to engage the pronounced octave effect. From mellow and subdued crunch to all-out searing fuzz and everything in between, this pedal is a virtual library of dirt encased in orange velvet!
To get started, keep the Octave switch off and roll the Fuzz to the “Mellow” side for warm, square-wave distortion. Then engage the Octave effect, crank the Fuzz to “Brite", and increase the Sustain for maxed-out, hyper-compressed tones that are barely hanging on for dear life! Electric guitar is the obvious application, but try it on synthesizers, drum machines, bass, acoustic/electric, and more. If you can plug a cable into it, the Foxy Tone Box can add character you just can’t get anywhere else.
- FAITHFUL RECREATION OF THE ORIGINAL “FOXY” FUZZ CIRCUIT WITH 100% ANALOG, FULLY DISCRETE SIGNAL PATH
- PREMIUM COMPONENTS USED THROUGHOUT, INCLUDING THE NOS 2N3565 FAIRCHILD TRANSISTORS FOUND IN THE ORIGINAL CIRCUIT
- USES CARBON RESISTORS, GERMANIUM 1N34A DIODES, AND PREMIUM FILM CAPACITORS
- TRUE BYPASS OPERATION
- GOLD-PLATED PCB PADS
- VOLUME, SUSTAIN, AND FUZZ KNOBS
- OCTAVE SUSTAIN SWITCH FOR ENGAGING THE OCTAVE-UP EFFECT
- 1/4" INPUT (INST) AND OUTPUT (AMP) JACKS
- RED LED POWER INDICATOR
- GROOVY VINTAGE ENCLOSURE COVERED IN ORANGE VELVET
- POWERED BY 9V BATTERY OR STANDARD 9V DC PEDAL ADAPTER (2.1MM, CENTER NEGATIVE DC ADAPTER INCLUDED)
- POWER CONSUMPTION: 1.5MA
- WIDTH: 6.5"
- DEPTH: 3.75"
- HEIGHT: 1.5"
- WEIGHT: 1.4 LBS
You read that right! Any orders over $75 ship for free!*
The CME Difference: CME's mission is to make sure your shipment will arrive quickly, carefully, and correctly. We realize that the online ordering of guitars and instruments, in general, can be a nerve-racking experience. We are here to put your mind at ease and make your transaction smooth and enjoyable! As musicians ourselves, we want to make sure everything gets to you the way it should, every time.
Most orders ship the same or next day: We greatly appreciate your patience, and are working hard to fulfill all requests as quickly as possible, while practicing recommended safety guidelines.
Our Bottom line: We care! This is something we take very seriously, because it's what you deserve. Our shipping, sales, and customer service teams are always striving to create the best experience for you. If you have any questions, comments, or concerns, we want to know.
Please don't hesitate to reach out to support@chicagomusicexchange.com, or call us directly at 773-525-7773.
*Special exceptions do apply.
STORE HOURS (CST)
APPOINTMENT ONLY Mon
day-Tuesday
12PM-7PM Wednesday-Friday
10AM-7PM Saturday
10AM-5PM Sunday
Before & After Hours: Try us!
If we are not available, our commitment is to get back to you no later than the next day.
US & International: +1 (773) 525-7773
Fax: 773-525-2775
LOCATION
3316 N Lincoln Avenue Chicago, IL 60657
We're right off the CTA Brown Line 'Paulina' Stop Just North of Belmont and just West of Ashland.
We’re all musicians here at Chicago Music Exchange and we want you to love the gear you get from us. We understand that sometimes you get a piece of gear that doesn’t work out for you. That’s why we offer an easy return policy to take the stress out of purchasing from us.
If you decide you'd like to return an item, please contact your Sales Rep, chat us, or give us a call.
If you placed your order on Amazon or eBay, we advise issuing the return request from your account on the platform of purchase - our Customer Service team will process a refund upon receipt of the item(s).
Most new items may be returned within 30 days of delivery and most vintage & used items may be returned within 3 days of delivery for a full refund, exchange, or store credit. Please pack the product safely for the journey back to us. If the product was shipped for free, the charge will be deducted from refund, unless the reason for the return is outside normal circumstances.
Please contact us as soon as possible if your order was received incorrectly, damaged, or defective. Most times we will give you an RA number (Return Authorization). Why is that number important? This will allow us to speed up the process of the return.
We reserve the right to charge a restocking fee based on the return condition. Some items we just can’t take back for returns, due to a one time function like strings or drums heads and other times it’s not sanitary to do so with microphones or harmonicas. If you aren’t sure if what you bought falls into a category like this, call us (773) 525-7773!
We strive to get your return processed quickly. Most of the time we have it done within two business days. Funds going back to credit cards usually takes two to four business days. CME strives to make sure all customers are happy with their experience. It is our priority to provide great service along with great gear. We always want to be helpful, and open to your feedback. Please let us know your thoughts! If you have any questions, we’re here for you!
Feel free to email us at customerservice@chicagomusicexchange.com or give us a call at (773) 525-7773.