MON-SAT: 11-7 | SUN: 11-5 | 888-686-7872
Your Channel 2 has two knobs, one controlling Master Volume and the other controlling Gain, which sweeps from unity to +24dB. Connect a music equipment power supply of 9VDC, center negative, to the power jack for
use. There is no battery in your Channel 2. The Gain control adjusts both the gain and DC bias on the MOSFET transistor at the same time, causing a rushing noise when adjusted. This is normal. At low gains, your Channel 2 has an input impedance of 5 Million ohms, giving your guitar a very sparkly texture when plugging directly in, with no other pedals or tuner between. This will clear up even the longest, dullest-sounding guitar cord.
With the Master turned up, the Channel 2 is exactly the same as our famous Super Hard-On pedal! With the Master Volume turned down, the Gain can be used to create clear, natural sounding distortion. Or, if you prefer to overdrive your favorite amp, leave the Master up and let 'er rip!
From Pedaltrain: Pedaltrain’s all-new Classic Series is rooted in the company’s best-selling pedal board models. Pedaltrain has incorporated design improvements that make these models better than ever. The Classic 2...
Enables you to manipulate your effects in real-time without having to take your hand away from your instrument or bend down. Tap the wings left and right with your toes...
A 1 SPOT is the original 9V DC adapter that only takes up 1 Spot on an outlet strip or wall outlet. It solves an annoying problem that people have...
This splitter adapter cable divides one Pedal Power output to two pedals. The splitter has two 2.1mm jacks which will connect to any 2.1mm plug. The white stripe cable is...
Subscribe to our email newsletter for all the latest gear news and updates.
© 2017 Chicago Music Exchange. All Rights Reserved. 3316 N. Lincoln Ave Chicago, IL 60657 (773) 525-7773.