Take A Trip Down Memory Lane With The Relaunch Of Diamond Pedals!

Pick up your exclusive CME Exclusive Memory Lane Delay in Pacific Peach finish!

Blending analog companding, anti-aliasing|reconstruction filters with a bucket brigade style delay line, we have immaculately captured the ethereal essence of the original big-box Memory Lane using Diamond’s innovative digital Bucket Brigade Delay technology (dBBD). Basically what we’re saying is, you get all the goodness of the original Memory Lane in a smaller footprint, over double the delay time, extended frequency response, higher SNR, and at a fraction of the current draw.  

This innovative progression of the Memory Lane is defined by 3 distinct delay lines to offer modern or vintage sounds.  

Advanced Features  

• GEEZER MODE: The Memory Lane has to have its classic operating mode. No frills, pure tone. GEEZER mode disables the secondary footswitch functions for those-seeking maximum simplicity. Hold the TAP|MODE toggle switch down during the entire LED power-up sequence to turn GEEZER mode on or off.  
• TRAILS MODE: In TRAILS mode, the delayed signal will trail off according to the FEEDBACK knob when the effect is bypassed. In non-trails mode, the delay will immediately kill the delayed signal when the effect is bypassed.  

Hold the TAP|MODE toggle switch up during the entire LED power-up sequence to turn TRAILS mode on or off.  

MOMENTARY | LATCHING MODE: the MODULATION and DOUBLER can operate in either:  

1). Momentary |only while its footswitch is held down   
2). Latching |toggled on and off when its footswitch is held down  

Hold down the ON|MOD or TAP|DBL footswitch during the entire LED power-up sequence to change its respective operation.  

All of our research and development has culminated into a unique sonic signature that can only be described as distinctly Memory Lane.   

There isn’t a compressor that’s more sought after than Diamond’s yellow box. This next-gen compressor maintains the classic circuit architecture while increasing range and functionality. The new EQ section allows you to sculpt your tone in the same box that squashes it (that’s a good thing). Furthermore, the tilt switch allows you to go from the signature ultra-snappy Diamond comp style all the way to softer transparent compression.  

Main Features  
 

• Naturally smooth optical compression from a custom US-made Opto-Isolator 
• Mid boost and cut  
• Switchable Tilt EQ section 
• Wide-ranging compression control and attack switch with LED indicator  
• Top-mounted jacks and soft touch relay switching  
• Burr Brown Integrated circuits  

What a buzzword “compression” is. But as soon as you slap one into your chain, you can never go back. Applicable in almost every situation, compression is the glue that keeps your tone tight and in the pocket. While the original Diamond Compressor was a formidable pedal, we can confidently say that this next-generation is the best version of the Diamond Compressor yet.  

We are serious when we say this pedal will always be on. Whether you’re looking for the snappiest compression to compliment your intricate funk leads, or soft transparent style compression to just add that perfect final touch to your tone, the Diamond Comp/EQ can do it all. So here’s how to use your new “always-on” pedal.  

Place the Comp/EQ at the very beginning of your signal chain for a traditional compression effect or place it at the very end of the chain to act as a limiter. Need a boost? Place the Comp/EQ behind your drives and fuzzes to with the Comp set low to send your leads soaring! 

Soaked to the bone in legendary Diamond DNA, the new generation Diamond Drive is built on a foundation of signature drive and EQ soundblocks. Distilling the most desirable and functional elements from the almighty J-Drive, Blaze, and Fireburst pedals, the Diamond Drive combines a warm and wide-ranging overdrive built around a Premium Sound Burr-Brown Op-amp with a dual band, post-gain active EQ.  

Main Features 

• Original J-Drive Style Gain Circuit with Burr Brown Integrated Circuit 
• Fireburst Inspired Dual Band Active Post-gain Baxandall EQ 
• Selectable warm switch for soft treble shelving filter 
• Soft-touch, True Bypass switching and top-mounted jacks 
• Made in Montreal, Canada.  
• Powered by 9-18V DC PSU  
• Center negative tip 2.1 mm barrel jack 
• Current Draw: 17mA

The new Diamond Drive was designed to nail the most demanding sessions. The Warm toggle will tame an overly bright amp or give your tone just the right amount of cream, while the wide-ranging Bass, Trebble, and Drive controls will deliver anything from a touch of hair to amp-sizzling overdrive. Sculpt your driven tones to perfection.

Housed in a compact enclosure with top jacks, 9-18V DC operation and soft-touch relay based true bypass switching system, the Diamond Drive might finally be the last overdrive you’ll need. 

There’s something truly magical about finding the compression sweet-spot on bass. Enter the Diamond Bass COMP/EQ. This bad-boy will go on your board, and never come off. This next-gen compressor maintains the classic circuit architecture while increasing range and functionality. The new EQ section allows you to sculpt your tone in the same box that squashes it (that’s a good thing). Furthermore, the tilt switch allows you to go from the signature ultra-snappy Diamond comp style all the way to softer transparent compression.  

Main Features  

• Naturally smooth optical compression from a custom US-made Opto-Isolator 
• Mid boost and cut  
• Switchable Tilt EQ Fulcrum Frequency covering 250,500, & 900 Hz +|- 6dB  
• Wide-ranging compression control and attack switch with LED indicator  
• Top-mounted jacks and soft touch relay switching  
• Burr Brown Integrated circuits  

What a buzzword “compression” is. But as soon as you slap one into your chain, you can never go back. Applicable in almost every situation, compression is the glue that keeps your tone tight and in the pocket. While the original Diamond Compressor was a formidable pedal, we can confidently say that this next-generation is the best version of the Diamond Compressor yet.  

We are serious when we say this pedal will always be on. Whether you’re looking for the snappiest compression to compliment your intricate funk leads, or soft transparent style compression to just add that perfect final touch to your tone, the Diamond Comp/EQ can do it all. So here’s how to use your new “always-on” pedal.  Place the Comp/EQ at the very beginning of your signal chain for a traditional compression effect or place it at the very end of the chain to act as a limiter. Need a boost? Place the Comp/EQ behind your drives and fuzzes to with the Comp set low to send your leads soaring!