Description
Description
INCLUDES:
- Earthquaker Devices Hummingbird Repeat Percussion Tremolo v4
- Truetone 1 Spot Space Saving 9v Adapter
OVERVIEW: Welcome to your new Hummingbird™ Repeat Percussion tremolo! The Hummingbird is a choppy, sawtooth tremolo modeled on the vintage “repeat percussion” unit and similar to those found in old Valco and Vox amplifiers. It is capable of producing everything from classic “50’s style” shimmering tremolo to a synthy, delay-like chop that turns your signal into a burst of short pings and on through to near ring modulation speeds. Simply choosing between modes 1 (slow), 2 (mid-tempo) or 3 (fast) and adjusting the rate and depth controls will unlock a whole new world of amplitude modulation at your feet. The Rate is also expression pedal accessible to allow instant changes on the fly. Using an expression pedal opens up the possibility of true random amplitude modulation! In addition to the modulation, the Hummingbird has plenty of clean gain on-tap allowing you to either boost or cut the signal using the level control. If the Depth is turned to zero, the Hummingbird will become a JFET clean boost! The Hummingbird is all analog, true bypass and handmade one at a time on a gilded cloud in Akron, Ohio.Bundle includes Truetone 1 Spot Space Saving 9v Adapter.
SPECS:
Earthquaker Devices Hummingbird Repeat Percussion Tremolo v4- This device features Flexi-Switch™ Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.
- For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.
- For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.
- Only takes up ONE position on your outlet strip or wall outlet!!
- Handles from one to over twenty guitar pedals (1700mA max!)
- New heavy duty output cable!
- Use with optional multi-plug cable(s) for powering more than one pedal.
- Guaranteed to work with any equipment that uses one of the following adapters (over 90% of the effects pedals on the market!):
- Boss PSA, Boss ACA, Danelectro DA-1, DOD PS-200R, Dunlop ECB-03, Ibanez AC-109, Korg A30950, Morley 9V, Zoom AD-0006.**
- With new converter plugs, the 1 SPOT will work with virtually ANY 9V pedal! ...even Line 6 modeling pedals! **
- Will even convert international voltage (100V-240V) automatically; no transformer needed!
- 3 meter (10') cable is almost twice as long as other adapter cable.
WARNING: This product can expose you to chemicals including Cobalt, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.