My shopping cart
Your cart is currently empty.
Continue Shopping
Finish Details: | Original |
Body Material: | Maple |
Body Details: | Maple laminate semi-hollow body |
Neck Material: | Maple |
Fingerboard Material: | Rosewood |
Neck Profile: | U-Shape |
Neck Thickness (IN): | 1st fret: .85", 12th: .94" |
Fingerboard Radius: | 12.00" |
Nut Width: | 1-5/8" |
Scale Length: | 24 3/4" |
Neck Details: | One-piece maple bolt-on neck (though it is glued in place) with a rosewood board, pearloid center dot inlays, truss adjustment at the headstock |
Electronics: | Single-coil pickups, 3-way toggle pickup selector switch, master volume & tone controls |
Pickup Measurements: | Neck: 6.3 kΩ, Bridge: 7.6 kΩ |
Hardware: | The trem arm is not original -- 3/6 tuning peg ferrules are missing |
Weight: | 6lbs 7oz |
Modifications/Repairs: | Non-original trem arm -- The bolt-on neck has been glued in place -- The truss rod cover is missing |
Case Details: | Gig bag |
Cosmetic Condition: | This vintage frames shows aging and play wear. The body has clouded in various and nice checking can be seen throughout. Nicks, chips, dings, and other various blemishes exist.. |
Tech Notes: | Currently, setup with 10-gauge strings. Due to the neck angle the action is set high with the bridge all the way down. However, the guitar plays well within the lower frets (0-7). The truss rod functions, though there is a bit of an "S" curve when sighted. |