Taylor SB-C1 Solidbody Walnut

6-String Solid Body Electric Guitar with Ebony Fingerboard. Made in the USA.
Be the first to review!

Taylor SB-C1 Solidbody Walnut

Used

Description & Specs

The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please visit our Lincoln Avenue showroom or call to speak to one of our Used and Vintage experts.
Finish Details: Original
Body Material: Sapele
Body Details: Solid Sapele body with a two piece Walnut top.
Neck Material: Sapele
Fingerboard Material: Ebony
Neck Profile: C
Neck Thickness (IN): 1st: 0.85" 12th: 0.86"
Fingerboard Radius: 12.00"
Nut Width: 1-11/16"
Scale Length: 12"
Neck Details: Bolt on Sapele neck with an unbound ebony fretboard.
Electronics: The electronics are original and consist of two mini humbucker pickups, a five position pickup selector switch, a volume control, and a tone control.
Pickup Measurements: neck: 6.27kΩ bridge: 7.82kΩ
Hardware: Orignal hardware
Weight: 8lbs 1oz
Modifications/Repairs: The nut has been replaced with a bone nut.
Case Details: Original Hardshell Case
Cosmetic Condition: The finish is glossy and has minimal scratches. There is some finish checking on the neck near the 1st-3rd fret on the bass side of the neck. There is also some checking at the top of the headstock.
Serial Number: 20071207931
Tech Notes: This guitar plays well with low action when setup with 10 gauge strings and optimal neck relief.
×