Description
Description
INCLUDES:
- Earthquaker Devices Spires Double Fuzz
- Truetone 1 Spot Space Saving 9v Adapter
OVERVIEW: The Spires was born from my need to have my big old Rosac Nu Fuzz and our now discontinued Dream Crusher on my pedalboard without taking up all the space. The green channel features a cranked fuzz inspired by the Rosac Electronic Nu-Fuzz, which, for all the unacquainted fuzz seekers, was released in 1968- decades prior to the dreaded “nü” prefix ever being uttered. The original schematic for Rosac Nu Fuzz is somewhat of a mystery so I used my original to make a “sonic copy” that is pretty much dead on. It is full-on fuzz all the time and uses crude wide range tone control to change the character from big and warm to sizzling and blown out. The original was slightly below unity at max so I gave this one plenty of output volume while retaining the original tone. The Red channel is a silicon version of the now discontinued Dream Crusher. There's no need to mourn the loss anymore. Dreams will still be crushed with walls of classic two transistor fuzz, only this time the crushing will be much more stable and less temperature sensitive. It features a very usable, dynamic Fuzz control and tons of output volume, just like the original. Each Spires is hand made one at a time by a white gloved team of professional experts in the dirty, dusty canyon of Akron, Ohio.
This device is true bypass and uses relay based “soft touch” switching. Audio will not pass without power. Bundle includes Truetone 1 Spot Space Saving 9v Adapter.
SPECS:
Earthquaker Devices Spires Double Fuzz- Channel Switch: Selects between Red (Dream Crusher) and Green (Nu Fuzz) channels
- Activate Switch: Turns the effect on and off
- Green Controls
- Tone: Changes the tonal character of the fuzz. Darker counterclockwise, brighter clockwise.
- Green: Sets the output level when the green LED is lit.
- Red Controls
- Fuzz: Adjusts the fuzz amount, dirtier clockwise, cleaner counterclockwise
- Red: Sets the output level when the red LED is lit.
- Power: Please use a standard 9 volt DC power supply intended for musical instruments with a negative center 2.1mm barrel or a 9v Battery.
- Only takes up ONE position on your outlet strip or wall outlet!!
- Handles from one to over twenty guitar pedals (1700mA max!)
- New heavy duty output cable!
- Use with optional multi-plug cable(s) for powering more than one pedal.
- Guaranteed to work with any equipment that uses one of the following adapters (over 90% of the effects pedals on the market!):
- Boss PSA, Boss ACA, Danelectro DA-1, DOD PS-200R, Dunlop ECB-03, Ibanez AC-109, Korg A30950, Morley 9V, Zoom AD-0006.**
- With new converter plugs, the 1 SPOT will work with virtually ANY 9V pedal! ...even Line 6 modeling pedals! **
- Will even convert international voltage (100V-240V) automatically; no transformer needed!
- 3 meter (10') cable is almost twice as long as other adapter cable.
WARNING: This product can expose you to chemicals including Cobalt, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.