• Earthquaker Devices Buffer Splitter V1 2026 EQD Day One-of-a-Kind #1 Effect Pedals
1 1
  • Brand New
Earthquaker Devices

Earthquaker Devices Buffer Splitter V1 2026 EQD Day One-of-a-Kind #1

Earthquaker Devices Buffer Splitter V1 2026 EQD Day One-of-a-Kind #1

£68.00
£68.00
Questions? Chat Now!
Chat or call us to view this item in our showroom!

Description
2026 is the fifth year in a row that EarthQuaker Devices has approached Chicago Music Exchange with a chance to get the one-of-a-kind pedals from their annual EarthQuaker Day celebration. We look forward to getting them each year and we are very excited to offer them to you. Each pedal is unique and only available at Chicago Music Exchange. When they're gone, they're gone.

A buffer is an important tool to combat tone loss with long cable runs or in signal chains running lots of true bypass pedals. The EarthQuaker Devices Buffer/Splitter uses the same great high 1 Mohm input impedance and low 100 ohm output impedance found in our Buffer/Preamp to restore your tonal integrity! This buffer is designed to both maintain high end and give your low end a subtle, yet powerful, little kick for some added dimension!

What’s better than a single output buffer? A dual output buffer, that’s what! Use the EarthQuaker Devices Buffer/Splitter to split your signal into two and send them anywhere you like! Two amps! Turn a mono signal into a stereo signal! Send one output to your effects and use the other as a dry-through! Remove your tuner from the signal path… you get the idea!

  • Dimensions: 3.6875 x 1.8125 x 1.8125 in. (94 x 46 x 46 mm)
  • Current Draw: 15 mA
  • Input Impedance: 1 MΩ
  • Output Impedance: 100 Ω
  • Power: This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
View full details

SKU: EQD1OFF2026-BUFS-1

Description
2026 is the fifth year in a row that EarthQuaker Devices has approached Chicago Music Exchange with a chance to get the one-of-a-kind pedals from their annual EarthQuaker Day celebration. We look forward to getting them each year and we are very excited to offer them to you. Each pedal is unique and only available at Chicago Music Exchange. When they're gone, they're gone.

A buffer is an important tool to combat tone loss with long cable runs or in signal chains running lots of true bypass pedals. The EarthQuaker Devices Buffer/Splitter uses the same great high 1 Mohm input impedance and low 100 ohm output impedance found in our Buffer/Preamp to restore your tonal integrity! This buffer is designed to both maintain high end and give your low end a subtle, yet powerful, little kick for some added dimension!

What’s better than a single output buffer? A dual output buffer, that’s what! Use the EarthQuaker Devices Buffer/Splitter to split your signal into two and send them anywhere you like! Two amps! Turn a mono signal into a stereo signal! Send one output to your effects and use the other as a dry-through! Remove your tuner from the signal path… you get the idea!

  • Dimensions: 3.6875 x 1.8125 x 1.8125 in. (94 x 46 x 46 mm)
  • Current Draw: 15 mA
  • Input Impedance: 1 MΩ
  • Output Impedance: 100 Ω
  • Power: This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!