My shopping cart
Your cart is currently empty.
Continue Shopping
Finish Details: | Original w/ small finish touch-up |
Body Material: | Maple |
Body Details: | Carved out maple sem-hollow body. -- There is a small area on the top near the bass side waist where the finish was touched up. |
Neck Material: | Maple |
Fingerboard Material: | Rosewood |
Neck Profile: | C-Shape |
Neck Thickness (IN): | 1st fret: .84", 12th: .87" |
Fingerboard Radius: | 9.50" |
Nut Width: | 1-21/32" |
Scale Length: | 24 3/4" |
Neck Details: | Three-piece maple/walnut/maple set neck with a bound rosewood board, right triangle pearloid inlays, dual truss rods adjustable at the headstock -- This Ric has been refretted. -- Traditionally, Rickenbacker guitars have a lacquered fretboard. The finish was removed from this guitar during the refret exposing the raw rosewood. |
Electronics: | Two "Toaster" single-coil pickups, 3-way toggle pickup selector switch, master volume & tone controls per pickup, blend control, "Rick-O-Sound" & "Standard" output jacks (stereo & mono) |
Pickup Measurements: | n/a - due to wiring scheme |
Hardware: | Kluson tuners and a Mastery bridge has been installed. -- The original tuning machines are included within the hard shell |
Modifications/Repairs: | Has been refretted & "Plek'd" by Mike Lull (COA included) -- The finish was removed from the board during the refretting process -- There is a small finish touch-up on the top of the body -- Non-original tuning machines and bridge |
Case Details: | Original hard shell case -- The middle latch is not functional |
Cosmetic Condition: | This Ric shows nice play wear throughout. There is some minor finish chipping around the neck heel. Minor nicks, dings, and other various blemishes exist. |
Serial Number: | L76728 |
Tech Notes: | Currently setup with 10-gauge strings, low action, and optimal neck relief. The frets are tall showing little to no play wear. |