Vintage Vibes: 1968 Martin D12-35 Featuring Karl Neurauter
Our acoustic guru Karl details the resurrection of this fabulous 1968 Natural Martin D12-35 into the consummate player-grade vintage gem it is today. Performing necessary repairs for an instrument of its age, our talented team of luthiers have expertly rebuilt this 12-string into an incredibly comfortable, stable, and beautiful sounding guitar. Listen to this near-50-year-old work its magic solo and in conversation with Shelby’s Les Paul.

TECH SPECS
Finish: Original finish except for touchup and over-spray on neck heel crack repair.
Top Material: Spruce Top
Body Material: Brazilian Rosewood Body
Body Details: Brazilian rosewood back and sides with spruce top.
Neck Material: Mahogany Neck
Fingerboard Material: Ebony Fingerboard
Neck Profile: medium/wide, soft "V"
Neck Thickness (IN): 1st- .84" 12th- .94"
Fingerboard Radius: 16.00
Nut Width: 1-7/8 in
Neck Details: One piece mahogany neck with bound ebony board. The neck has undergone extensive repair (see Modifications/Repairs section and pictures).
Hardware: The nut is original. The tuners have been replaced. There is a strap button installed in the heel. Several of the bridge pins are slightly mismatched. The pick guard is not original.
Weight: 4 lbs 14.8 oz
Modifications / Repairs: -The guitar has had a neck reset and been refretted. When the neck was reset, the tongue was completely removed from the neck. As a result, there is a gap in the binding at the 12th fret. -All of the neck binding has been reglued. -The neck heel has been extensively repaired. The lower half of the neck heel was cut off and replaced at some point. The neck heel was then over-sprayed. Later, a larger crack occurred in the heel above this repair. This crack has been glued and lightly touched up. -There is a repaired hairline crack in the back of the body near the neck heel. -There is a repaired crack in the treble side shoulder of the body starting at the neck heel. -There are repaired cracks on either side of the fingerboard tongue in the top. -There is a small hairline crack in the tongue end of the fingerboard and a small chip of ebony missing between the 16th and 17th frets. This is not affecting playability. -Several of the back braces have been reglued. -The bridge has been reglued. -An under-bridge transducer pickup has been installed. -The tuners have been replaced. -A strap button has been installed in the neck heel. -The pick guard has been replaced.
Case Details: Original hard shell case.
Serial Number: 236406

SHOP Vintage martin GUITARS
Related Posts
BOSS | Katana V3 Amplifiers
Take your guitar-playing ambitions to the next level with the new generation of Boss Katana V3 amplifiers! Available in 100-watt and 50-watt amp head or combo amp options (1x12” or...
Read morePRS | DGT 15 Amplifier Head & Cabinet
Designed from the ground up to rival David Grissom’s favorite vintage amps, the PRS DGT 15 comes packed with tone-sculpting features to go from sparkling cleans to heavy overdrive, offering...
Read moreFriedman | Plex Vintage Series
The new Friedman Amplification Plex Vintage Series 50-watt head represents the realization of the master amp builder’s dream to capture the magic of his own beloved “Plexi” amplifier! The Friedman...
Read more


