My shopping cart
Your cart is currently empty.
Continue ShoppingBenson Monarch Reverb 1x12 Combo Night Moves w/Wheat Grill
15-Watt 1x12" 6V6 Tube Electric Guitar Amplifier Combo. Made in the USA.
Benson Monarch Reverb 1x12 Combo Night Moves w/Wheat Grill
Brand New
- $3,709.00
UNAVAILABLE
Brand New
- $3,709.00
UNAVAILABLE
From Benson:
“The Monarch was my first design, and largely what my other amps are based on. When I worked at Verellen Amps in the late 2000s, several amps would come in for repair every week….high powered vintage monsters all the way to low powered newer boutique amps. Here’s an annoying thing I did….instead of working hard like I should have, I took them apart and studied their circuit designs. If I liked a particular aspect of an amp I would try to figure out what it was. This eventually grew into an understanding of how harmonics are built up, how a circuit is filtered and gain staged, what components sound like, what engineers were trying to achieve, and how they succeeded and failed. It was also an education in what fails on the road and how to make something that is easily repairable.
I had a donor metal chassis sitting under my bench at the time….an old Bogen PA head….that I would incrementally build snippets of circuits I was particularly interested in…it probably went through hundreds of permutations. Often I would tack solder circuits together, often while it was powered up, (Which I don’t recommend). One day all the pieces fell into place, and I got a euphonic clean tone that transitioned into an aggressive harmonic distortion and I about fell over. I showed it to my bandmate and we freaked out.. That design became the Monarch” -Chris
Build
Speaker Options
Dimensions/weight: 23.5”W 17.5”H 10”D 39 lbs
“The Monarch was my first design, and largely what my other amps are based on. When I worked at Verellen Amps in the late 2000s, several amps would come in for repair every week….high powered vintage monsters all the way to low powered newer boutique amps. Here’s an annoying thing I did….instead of working hard like I should have, I took them apart and studied their circuit designs. If I liked a particular aspect of an amp I would try to figure out what it was. This eventually grew into an understanding of how harmonics are built up, how a circuit is filtered and gain staged, what components sound like, what engineers were trying to achieve, and how they succeeded and failed. It was also an education in what fails on the road and how to make something that is easily repairable.
I had a donor metal chassis sitting under my bench at the time….an old Bogen PA head….that I would incrementally build snippets of circuits I was particularly interested in…it probably went through hundreds of permutations. Often I would tack solder circuits together, often while it was powered up, (Which I don’t recommend). One day all the pieces fell into place, and I got a euphonic clean tone that transitioned into an aggressive harmonic distortion and I about fell over. I showed it to my bandmate and we freaked out.. That design became the Monarch” -Chris
- 2 x JJ 6V6 power tubes, 2 x JJ 12AX7 preamp tubes, 12DW7 reverb driver, 5AR4 rectifier
- Speaker outputs: 1 x 8 ohm
- Foot switchable reverb
Build
- Point to point construction on terminal strips - no circuit, eyelet or turret board
- Custom Soursound output transformer
- Carbon comp resistors
- Mallory 150M capacitors
- Dovetailed pine speaker cabinets
- Baltic birch head cabinets
Speaker Options
- Benson Custom Ceramic - Well balanced, punchy and warm ceramic tone
- Amperian VSOP Alnico 30 - Sounds pretty darn close to a vintage Jensen P12N
Dimensions/weight: 23.5”W 17.5”H 10”D 39 lbs
Have a Question for Our Experts about Pricing?
- Brand: Benson
Description & Specs
From Benson:“The Monarch was my first design, and largely what my other amps are based on. When I worked at Verellen Amps in the late 2000s, several amps would come in for repair every week….high powered vintage monsters all the way to low powered newer boutique amps. Here’s an annoying thing I did….instead of working hard like I should have, I took them apart and studied their circuit designs. If I liked a particular aspect of an amp I would try to figure out what it was. This eventually grew into an understanding of how harmonics are built up, how a circuit is filtered and gain staged, what components sound like, what engineers were trying to achieve, and how they succeeded and failed. It was also an education in what fails on the road and how to make something that is easily repairable.
I had a donor metal chassis sitting under my bench at the time….an old Bogen PA head….that I would incrementally build snippets of circuits I was particularly interested in…it probably went through hundreds of permutations. Often I would tack solder circuits together, often while it was powered up, (Which I don’t recommend). One day all the pieces fell into place, and I got a euphonic clean tone that transitioned into an aggressive harmonic distortion and I about fell over. I showed it to my bandmate and we freaked out.. That design became the Monarch” -Chris
- 2 x JJ 6V6 power tubes, 2 x JJ 12AX7 preamp tubes, 12DW7 reverb driver, 5AR4 rectifier
- Speaker outputs: 1 x 8 ohm
- Foot switchable reverb
Build
- Point to point construction on terminal strips - no circuit, eyelet or turret board
- Custom Soursound output transformer
- Carbon comp resistors
- Mallory 150M capacitors
- Dovetailed pine speaker cabinets
- Baltic birch head cabinets
Speaker Options
- Benson Custom Ceramic - Well balanced, punchy and warm ceramic tone
- Amperian VSOP Alnico 30 - Sounds pretty darn close to a vintage Jensen P12N
Dimensions/weight: 23.5”W 17.5”H 10”D 39 lbs
You read that right! Any orders over $75 ship for free!*
The CME Difference: CME's mission is to make sure your shipment will arrive quickly, carefully, and correctly. We realize that the online ordering of guitars and instruments, in general, can be a nerve-racking experience. We are here to put your mind at ease and make your transaction smooth and enjoyable! As musicians ourselves, we want to make sure everything gets to you the way it should, every time.
Most orders ship the same or next day: We greatly appreciate your patience, and are working hard to fulfill all requests as quickly as possible, while practicing recommended safety guidelines.
Our Bottom line: We care! This is something we take very seriously, because it's what you deserve. Our shipping, sales, and customer service teams are always striving to create the best experience for you. If you have any questions, comments, or concerns, we want to know.
Please don't hesitate to reach out to support@chicagomusicexchange.com, or call us directly at 773-525-7773.
*Special exceptions do apply.
STORE HOURS (CST)
APPOINTMENT ONLY Mon
day-Tuesday
12PM-7PM Wednesday-Friday
10AM-7PM Saturday
10AM-5PM Sunday
Before & After Hours: Try us!
If we are not available, our commitment is to get back to you no later than the next day.
US & International: +1 (773) 525-7773
Fax: 773-525-2775
LOCATION
3316 N Lincoln Avenue Chicago, IL 60657
We're right off the CTA Brown Line 'Paulina' Stop Just North of Belmont and just West of Ashland.
We’re all musicians here at Chicago Music Exchange and we want you to love the gear you get from us. We understand that sometimes you get a piece of gear that doesn’t work out for you. That’s why we offer an easy return policy to take the stress out of purchasing from us.
If you decide you'd like to return an item, please contact your Sales Rep, chat us, or give us a call.
If you placed your order on Amazon or eBay, we advise issuing the return request from your account on the platform of purchase - our Customer Service team will process a refund upon receipt of the item(s).
Most new items may be returned within 30 days of delivery and most vintage & used items may be returned within 3 days of delivery for a full refund, exchange, or store credit. Please pack the product safely for the journey back to us. If the product was shipped for free, the charge will be deducted from refund, unless the reason for the return is outside normal circumstances.
Please contact us as soon as possible if your order was received incorrectly, damaged, or defective. Most times we will give you an RA number (Return Authorization). Why is that number important? This will allow us to speed up the process of the return.
We reserve the right to charge a restocking fee based on the return condition. Some items we just can’t take back for returns, due to a one time function like strings or drums heads and other times it’s not sanitary to do so with microphones or harmonicas. If you aren’t sure if what you bought falls into a category like this, call us (773) 525-7773!
We strive to get your return processed quickly. Most of the time we have it done within two business days. Funds going back to credit cards usually takes two to four business days. CME strives to make sure all customers are happy with their experience. It is our priority to provide great service along with great gear. We always want to be helpful, and open to your feedback. Please let us know your thoughts! If you have any questions, we’re here for you!
Feel free to email us at customerservice@chicagomusicexchange.com or give us a call at (773) 525-7773.