EKO Sunburst 1960s

Short-Scale 4-String Hollow Body Bass Guitar with Brazilian Rosewood Fingerboard. Made in Italy.
Be the first to review!

EKO Sunburst 1960s

Vintage

Description & Specs

The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please visit our Lincoln Avenue showroom or call to speak to one of our Used and Vintage experts.
Finish Details: Original
Body Material: Maple
Neck Material: Maple
Fingerboard Material: Brazilian Rosewood
Neck Profile: "C" profile
Neck Thickness (IN): .84" (1st fret), .93" (12th fret)
Fingerboard Radius: 9.50"
Nut Width: 1-1/2"
Scale Length: 29 1/2"
Neck Details: Bolt-on maple neck with bound Brazilian rosewood fretboard, dot inlays, zero fret, and heel-adjust truss rod spoke.
Electronics: Original single coil pickups and electronics, with 4-position rotary switch (off, bridge, neck, both) and volume/tone controls for each pickup. The pots do not have visible date codes.
Pickup Measurements: N/A due to wiring scheme
Hardware: Original
Weight: 5lbs 8oz
Modifications/Repairs: The neck has been shimmed to the correct angle.
Case Details: Original chipboard case
Cosmetic Condition: The bass shows light cosmetic wear; the finish is glossy with light scratches and other small blemishes. There is some light finish wear around the bridge as well.
Serial Number: 309464
Tech Notes: Plays well with medium-high action; the truss rod is adjustable, though the neck has a moderate twist with a hump on the treble side. The bass has been set up to accommodate this and plays cleanly. The frets are narrow and low with minor wear. This model was produced in the 1960s.
×