Gibson Grabber G3 Black 1975

4-String Bass Guitar with Maple Fingerboard. Made in the USA.
Be the first to review!

Gibson Grabber G3 Black 1975

Vintage

Description & Specs

The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please visit our Lincoln Avenue showroom or call to speak to one of our Used and Vintage experts.
Finish Details: Original
Body Material: Alder
Neck Material: Maple
Fingerboard Material: Maple
Neck Profile: "C" profile
Neck Thickness (IN): .82" (1st fret), 1.00" (12th fret)
Fingerboard Radius: 10.00"
Nut Width: 1-5/8"
Scale Length: 34 1/2"
Neck Details: Bolt-on maple neck with unbound maple fingerboard, dot inlays, and truss rod adjustment at the nut
Electronics: Original Gibson single-coil pickups and wiring harness, with 3-way toggle selector switch, and master volume/tone controls. The middle pickups is RW/RP and always on to cancel out hum. A couple solder joints appear to have been touched up; the pot codes date to 1975.
Pickup Measurements: N/A due to wiring scheme
Hardware: Original; the bridge cover is missing.
Modifications/Repairs: A few solder joints have been touched up.
Case Details: Hardshell case
Cosmetic Condition: The bass shows moderate wear, consistent with its age. The finish is glossy with scratches and numerous scattered dings, and small finish chips. The back of the body has light buckle rash, and the edges have multiple dings. The headstock face has a few small dings as well.
Serial Number: 400254
Tech Notes: Plays well with medium-low action and light neck relief; the neck has a mild S-curve as well, and the bass has been set up to play cleanly in this condition. The frets are wide and low with minor wear. The pot codes and serial number date to 1975.
×