Walrus Nautical Edition ARP-87, Deep Six, & Fathom Bundle

Be the first to review!

Walrus Nautical Edition ARP-87, Deep Six, & Fathom Bundle

Brand New
  • $597.00
In store now

Description & Specs

Avast, ye Mateys! The CME Exclusive Walrus Audio Nautical Edition Set has arrived, featuring limited-edition versions of the Fathom Multi-Function Reverb, Deep Six Compressor V3, and ARP-87 Multi-Function Delay. This exclusive set is only available at the Chicago Music Exchange in the United States and Anderton's in the United Kingdom, so catch yourself the whole set while you can. 

(​​These pedals can be purchased individually, or as a bundle)

ARP-87

The ARP-87 is a compact, feature-rich delay, packed with a large pallet of inspirational delay tones. Featuring four main algorithms, digital, analog, lo-fi, and slap back, the ARP-87 can cover some serious ground in the world of echoes.

The Digital algorithm boasts pristine, crystal clear repeats great for rhythmic riffs. The Analog setting works well to add warmth and dimension to chords and lines without getting in the way. The Lo-Fi algorithm, with its adjustable frequency range on the repeats, goes from warm, warped, and murky, to strait AM radio. Finally, the Slap setting makes it easy to dial in a great slap back echo perfect for smoking chicken pickin’ runs. With other features like our smart bypass switching, and momentary knob ramp, the ARP-87 provides endless creative opportunities that are waiting to be explored.  

The X knob changes functions depending on which Algorithm you are using. It adjusts a specific parameter in each algorithm. In Digital, Analog, and Slap modes, the knob will control modulation depth. In Lo-fi mode, the knob will control Filter width. 

Note that when changing delay types this loads a whole new algorithm and the tempo must be tapped in again. Max delay time is 1000ms.

Trails Mode:
The ARP-87 can be run in trails or no trails mode. In trails mode, when you turn the pedal off, the delay trails die off naturally. In no trails mode, the delay trails are abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

Momentary Functions:
When the switch is in off position, press and hold the Bypass Switch to temporarily activate the effect to add a moment of delay texture. Releasing the switch turns the effect off. When the effect is on, press and hold the bypass switch to momentarily ramp the X parameter to maximum. Releasing the switch sets the X parameter back to the knob location. 

Press and hold the Tap Switch to temporarily ramp the feedback to maximum. Release to set the feedback back to the knob location.

  • The ARP-87 comes in a Frosted Charcoal finish with cream and seafoam ink featuring original artwork by Chris Castro of a lone ship traveling through the ARP-87 Galaxies.
  • The diecast enclosure’s exact size is 4.77" x 2.6" x 1.39".
  • Power requirements are 9VDC (100mA minimum).
  • The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
  • Daisy chain power supplies are not recommended. Power supply not included.


Deep Six

The Deep Six is a true bypass studio-grade compressor in stomp box form, inspired by the performance of the Universal Audio 1176 with the simplicity of the Ross and Dynacomp. Offering a Level, Sustain, Attack, and Blend control, the Deep Six will give you unmatched versatility at a price you can afford.

Polarity will never be an issue as the Deep Six comes standard with a polarity correction circuit. The internal voltage is doubled to 18 volts giving you the maximum amount of headroom for your sound while maintaining a typical current draw of 8.9mA.

The Deep Six also offers a Blend and Attack control which allows you to use the pedal with active pickups or humbuckers. The blend feature allows you to use high output instruments while truly being able to dial out any distortion that may be present.

  • 9V DC 8.9mA – 4.77 x 2.9 x 2.3 inches.
  • The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
  • Power supply not included.


Fathom

The Fathom is a feature-rich reverb with 4 different customized reverb algorithms to choose from. Easily go from tasteful, small room reverb to long, modulated trails dripping of ambient goodness. The toggle switch adds options for low, medium and high modulation. Use the dampen knob to fine tune the tone of the reverb's decay.

Momentary Functions:
When the pedal is in off position, press and hold the Bypass Switch to temporarily activate the effect to add a moment of reverb. Releasing the switch turns the effect off.

Press and hold the Sustain Switch while the pedal is on, to sustain the reverb decay for a dreamy ambient decrescendo.

Trails Mode:
To turn trails mode on or off, unplug the pedal and press and hold down the Bypass Switch for two seconds while plugging the pedal back in.

  • The diecast enclosure’s exact size is 4.77" x 2.6" x 1.39”.
  • Power requirements are 9VDC (100mA minimum).
  • The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
  • Power supply not included.

You read that right! Any orders over $30 ship for free!*

The CME Difference:  CME's mission is to make sure your shipment will arrive quickly, carefully, and correctly. We realize that the online ordering of guitars and instruments, in general, can be a nerve-racking experience. We are here to put your mind at ease and make your transaction smooth and enjoyable! As musicians ourselves, we want to make sure everything gets to you the way it should, every time.

Most orders ship the same or next day:  
We greatly appreciate your patience, and are working hard to fulfill all requests as quickly as possible, while practicing recommended safety guidelines.

Our Bottom line: We care! This is something we take very seriously, because it's what you deserve. Our shipping, sales, and customer service teams are always striving to create the best experience for you. If you have any questions, comments, or concerns, we want to know.

Please don't hesitate to reach out to support@chicagomusicexchange.com, or call us directly at 773-525-7773.

*Special exceptions do apply.

The CME Showroom is Open!

Our maximum capacity is 50 people. Per Illinois mandate, we require a mask be worn for entry, and during the length of your visit. Please observe social distancing guidelines while in the store. Thank you for your cooperation.



STORE HOURS (CST)

12PM-6PM Tues-Sat

CLOSED Sun-Mon


Scheduling an appointment is preferred, but we are taking walk-ins. For more details, give us a call at (773) 525-7773


Before & After Hours: Try us!
If we are not available, our commitment is to get back to you no later than the next day.


US & International: +1 (773) 525-7773


Fax: 773-525-2775



LOCATION 

3316 N Lincoln Avenue Chicago, IL 60657


We're right off the CTA Brown Line 'Paulina' Stop Just North of Belmont and just West of Ashland.

We’re all musicians here at Chicago Music Exchange and we want you to love the gear you get from us. We understand that sometimes you get a piece of gear that doesn’t work out for you. That’s why we offer an easy return policy to take the stress out of purchasing from us.

If you decide you'd like to return an item, please contact your Sales Rep, fill out the Return Request form below, or give us a call.

If you placed your order on Amazon or eBay, we advise issuing the return request from your account on the platform of purchase - our Customer Service team will process a refund upon receipt of the item(s).

Most new items may be returned within 30 days of delivery and most vintage & used items may be returned within 3 days of delivery for a full refund, exchange, or store credit. Please pack the product safely for the journey back to us. If the product was shipped for free, the charge will be deducted from refund, unless the reason for the return is outside normal circumstances.

Please contact us as soon as possible if your order was received incorrectly, damaged, or defective. Most times we will give you an RA number (Return Authorization). Why is that number important? This will allow us to speed up the process of the return.

We reserve the right to charge a restocking fee based on the return condition. Some items we just can’t take back for returns, due to a one time function like strings or drums heads and other times it’s not sanitary to do so with microphones or harmonicas. If you aren’t sure if what you bought falls into a category like this, call us (773) 525-7773!

We strive to get your return processed quickly. Most of the time we have it done within two business days. Funds going back to credit cards usually takes two to four business days. CME strives to make sure all customers are happy with their experience. It is our priority to provide great service along with great gear. We always want to be helpful, and open to your feedback. Please let us know your thoughts! If you have any questions, we’re here for you!

Feel free to email us at customerservice@chicagomusicexchange.com or give us a call at (773) 525-7773.