Alexander Pedals Syntax Error 2 Pedal

Description & Specs

• SAMP: Sample Crusher, reduces bit depth and sample rate at higher settings.
• PITCH: Sets the pitch shift interval from -1 octave to +1 octave, in semitones.
• P.MIX: Sets the mix of the pitch shifter effect from dry to fully wet.
• VOL: Sets the overall volume of the effect, unit is at 50%.   
• TONE: Sets the overall brightness of the sound.

• STRETCH MODE - This mode records the input signal into a sample buffer, and then plays it back in real-time. Great for glitchy delay effects, random reverse, or freaky feedback.
• PLAY sets the playback speed and direction, with forward at 0% and reverse at 100%. Middle settings will slow  down and pitch down the audio.
• SIZE sets the sample buffer size, shorter buffers will sound choppy.
• FEED controls the amount of sampled signal fed back in to the buffer, for repeat and echo effects.
• AIR MODE - Grainy, lo-fi reverb effect similar to very early digital and analogue reverberation devices.  Early  reflections and slow build times make this a unique textural tool.
• SIZE controls the decay time and simulated size of the reverb chamber effect.
• SOFT sets the diffusion amount, higher settings are smoother sounding.
• PDLY controls the pre-delay time before the reverb effect occurs.
• RING MODE - Balanced “ring” modulation effect, adds extra frequencies to the original tone that are mathematically related but not harmonically related.  Wild.
• FREQ controls the carrier frequency of the modulator.  This frequency is added and subtracted from the input.
• RAND applies a random frequency for “sample and hold” dial-tone effects.  Sounds like a very sick robot.
• DPTH sets the range of the RAND modulation.
• CUBE MODE - Math-based cubic distortion and fuzz effect, with tunable resonant filter.
• DRIV controls the distortion drive amount, higher settings also add some octave fuzz
• FILT sets the resonant filter cutoff frequency
• RESO tunes the resonance of the filter, set to minimum to bypass the filter effect
• FREQ MODE - Frequency shift effect, adds or subtracts a set frequency from the input signal.  Like pitch shift but all of the intervals are broken.  It’s horrible.
• SHFT frequency shift amount, smallest shifts are in the center of the range
• FEED controls feedback, increases intensity of the shift and delay effects at high settings
• DLAY sets delay time after the shift effect.  Set to minimum for phaser-like tones, set to maximum for spiral echo 
• effects.
• WAVE MODE - Time based modulator, used for chorus, vibrato, flanger, and FM effects.
• RATE sets the modulation speed, from very slow up to the audible band.  At higher speeds the modulation is in the audio band and sounds pretty weird.
• DPTH controls the amount of modulation.  We let you modulate it all the way, don’t complain if it gets gnarly.
• FEED applies feedback to the modulation, higher settings sound more like flange and lower settings more like chorus.