Description
Description
The Damnation Audio MOSFET Bass Distortion, simply referred to as the MBD, is the long awaited follow up to our original MBD-1 and MBD2 bass distortion pedals. The heart of the MBD is the same bass-loving distortion as the original, but with a few enhancements customers have longed for.
Those enhancements include a boost footswitch with a boost control providing over 30dB of additional gain and the inclusion of our newly designed contoured clean blend.
CONTROLS
Gain: Controls the amount of gain in the distortion channel.
Level: Controls the output level of the distortion channel.
Tone: Tilt-style tone control for the distortion channel centered around 600Hz.
Boost: Adds additional boosted signal into gain stages. Does not affect the clean blend circuitry.
Clean: Controls output level of parallel contoured clean channel.
Depth: Controls the amount of low end injected into the distortion channel. Depth settings below 12:00 will tighten up the distortion to retain clarity with drop-tuned basses without sacrificing low end. Higher depth settings will thicken up bright basses and add mass to standard-tuned instruments.
Power: Use only 9VDC 2.1mm center negative (boss-style) power adapters. Isolated pedal specific power supplies are highly recommended. Damnation Audio pedals are designed for maximum headroom and ideal performance with a 9V supply. Going above 9VDC may damage your pedal and void any warranties. Damnation Audio pedals do not accept 9V batteries.