My shopping cart
Your cart is currently empty.
Continue Shopping
Finish Details: | Original |
Body Material: | Ash |
Body Details: | Chambered ash body. The pickup cavities have 4 small holes drilled in them to accommodate the humbucker mounting screws. |
Neck Material: | Maple |
Fingerboard Material: | Maple |
Neck Profile: | "C" profile |
Neck Thickness (IN): | .86" (1st fret), .92" (12th fret) |
Fingerboard Radius: | 7.25" |
Nut Width: | 1-11/16" |
Scale Length: | 25 1/2" |
Neck Details: | Bolt-on maple neck with unbound maple fingerboard, dot inlays, skunk stripe, and "bullet" truss rod adjustment at the headstock |
Electronics: | The pickups have been replaced with aftermarket PAF-style humbuckers; the make is not apparent. The pots have also been replaced with Mojotone 500k pots, with a treble-bleed circuit on the volume control. Controls include 3-way toggle selector switch and master volume/tone controls. |
Pickup Measurements: | 7.5k (neck), 8.6k (bridge) |
Hardware: | The pickguard is not original. The jack cup has been replaced with an Electrosocket cup, and the strap buttons have been replaced with strap locks. |
Weight: | 8lbs 5oz |
Modifications/Repairs: | -The pickups and pots have been replaced, and the guitar has been partially rewired -The pickguard, jack cup, and strap buttons have been replaced -The pickup cavities have been slightly modified to mount the humbuckers |
Case Details: | Hardshell case |
Cosmetic Condition: | The guitar shows light signs of use; the finish is glossy with swirls and light scratches. |
Serial Number: | MN9391298 |
Tech Notes: | The guitar is currently set up with 10s, and plays well with low action. The neck has a slight twist resulting in more relief on the treble side, but the guitar has been set up to accommodate this. The frets show moderate wear. |