Rupert Neve Designs 5035 Shelford Channel Microphone Preamp / Inductor EQ / Compressor

Be the first to review!

Rupert Neve Designs 5035 Shelford Channel Microphone Preamp / Inductor EQ / Compressor

Brand New
  • $3,999.00
SHIPS FROM WAREHOUSE ? To request to view this item at our Lincoln Avenue showroom call or chat us now
or
$127.73/mo with 36-month Financing

Description & Specs

The Shelford Channel is built around Rupert Neve’s first new transformer-gain, class-A microphone preamplifier in over 40 years, a “best-of-the-classics” inductor EQ section, a tone-packed diode bridge compressor, the power of variable Silk saturation, a new dual-tap transformer output stage, and twice the operating voltage of vintage designs.


The Input Stage and Transformer Gain Mic Pre
Like Rupert’s designs from his time in Little Shelford , the Shelford Channel’s preamplifier uses a directly-coupled transformer input with gain provided by the custom transformer itself – a first in over 40 years for Rupert Neve. This new custom-designed input transformer, along with its careful integration with the surrounding class-A circuitry, is critical to the Channel’s bold and instantly recognizable character.

Conveniently, the Direct Input uses the same topology as the best-selling RNDI Active Transformer Direct Interface, providing astonishing clarity for high-Z instrument signals, with unparalleled low-frequency response and an incredibly smooth high end.


What is Silk?
The Silk & Texture circuit on the Shelford Channel allows you to fine-tune the amount (and type) of harmonic content in the output stage. This means your signal can be adjusted from quite transparent to settings that produce nearly 10x the amount of sonic color as Rupert’s vintage modules – and in two very unique modes. No matter what sound you’re looking for, Silk can help get you there.


The Dual Tap Transformer Output
Complementing the Silk circuit is the custom-designed output transformer, which uses Rupert Neve Designs’ unique dual-tap output topology. This offers both full-headroom (+26dBu) and -6dB outputs, allowing the engineer to drive the unit fully into classic transformer saturation without clipping converters and other devices later in the chain.


The “Best-Of” EQ
The Shelford Channel’s 3-band, custom-tapped inductor EQ was inspired by our favorite elements of Rupert’s vintage EQ designs. The low frequency band is designed to produce a creamy, resonant bass response similar to a vintage 1064 – but unlike the vintage modules, the LF band on the Shelford Channel can be used as either a shelf or a peak filter, adding punch, dimension, and control to your low end.

The midrange band is based on that of the 1073, ideal for sweetening vocals and instruments while bringing them forward in a mix, and its proportional “Q” response makes it well-suited for minimizing problematic frequencies. The high frequency band is a hybrid vintage / modern design, blending inductor circuitry with capacitor-based topologies to achieve vintage tones with enhanced control, with the shelf / peak corner switchable between 8K or 16K.


The Diode Bridge Compressor
Like the Inductor EQ and Transformer Gain microphone preamp, the Diode Bridge Compressor in the Shelford Channel is based on the same topologies found in Rupert’s vintage designs – but refined & adapted for the modern engineer.

What is diode bridge compression? Where the VCA compressor found in the Master Buss Processor provides unmatched clarity, the weighty, harmonically rich tonality of diode bridge compression can be essential in pushing key sources like vocals, electric guitars, bass and drums to the forefront of a mix. 

By understanding the limitations of vintage units like the legendary 2254, painstaking effort was taken to reproduce the unique tone of these classics while improving the noise floor & accuracy, expanding inflexible time constants, adding full wave sidechain detection for improved dynamic response, and widening the range of threshold and ratio controls. 

Delivering the powerful sound of these iconic designs with enhanced flexibility for the modern age, the Shelford’s diode bridge compressor is a dynamic tool equipped to make a statement on virtually any mix or track.


MIC PREAMP

INPUT IMPEDANCE
2200 Ohm

MAXIMUM INPUT
  • +21.5 dBu from 150 Hz to 22 kHz
  • +8 dBu 20 Hz to 22 kHz

NOISE
  • Un-weighted, 22 Hz-22 kHz, source impedance 150 Ohm balanced.
  • Main Out @ unity gain -100.9 dBu
  • -6 dB Out @ unity gain -106.6 dBu
  • +30 dB gain (Main Out) -91.37 dBu
  • +66 dB Gain (Main Out) -64.1 dBu
  • Equivalent Input Noise -121.37 dBu

FREQUENCY RESPONSE
+/-0.25 dB from 17 Hz to 45 kHz


DIRECT INPUT


MAXIMUM INPUT
8 dBu @ 20 Hz to 120 kHz

NOISE (MAIN OUTPUT)
-100 dBu (22 Hz to 22 kHz)


LINE INPUT

MAXIMUM INPUT LEVEL
+30.5 dBu 20 Hz to 30 kHz

TOTAL HARMONIC DISTORTION AND NOISE
  • @ 1 kHz, +20 dBu output level, no load: Better than 0.002%
  • @ 20 Hz, +20 dBu output level, no load: 0.05% Typical (2nd and 3rd harmonic)

NOISE (MAIN OUTPUT)
Un-weighted, 22 Hz - 22 kHz, source impedance 40 Ohm balanced, no load.
-101.1 dBu


FREQUENCY RESPONSE
+/- 0.25 dBu from less than 10 Hz to 110 kHz
-0.32 dB @ 120 kHz

MAXIMUM OUTPUT LEVEL
+26 dBu @ 16 Hz to 20 kHz


TOTAL HARMONIC DISTORTION AND NOISE WITH SILK ENGAGED

RED
  • MIN TEXTURE @ 100 Hz, +20 dBu input level, no load: 0.0131%, mostly 3rd harmonic (typical)
  • MAX TEXTURE @ 100 Hz, +20 dBu input level, no load: 1.66%, mostly 2rd harmonic (typical)

BLUE
  • MIN TEXTURE @ 100Hz, +20 dBu input level, no load: 0.0079%, mostly 3rd harmonic (typical)
  • MAX TEXTURE @ 100Hz, +20 dBu input level, no load: 0.941%, mostly 2rd harmonic (typical)


HIGH PASS FILTER
  • Continuously variable swept frequency from 20 Hz to 250 Hz.
  • Slope: 12 dB/Octave

EQ NOISE
Un-weighted, 22 Hz-22 kHz: -92 dBu

SIGNAL PRESENT
Illuminates GREEN when input stage signal level reaches -20 dBu

OVERLOAD INDICATOR
Illuminates RED when input stage signal level reaches -23 dBu


DIODE BRIDGE COMPRESSOR

  • NOISE (BW 22 Hz – 22 kHz)
  • 0 dB Makeup Gain: -84.5 dBu
  • +20 dB Makeup Gain: -64.2 dBu

TIME CONSTANTS
  • Measurements taken represent full range achievable between 1.5:1 Ratio and 8:1 Ratio setting.
  • 0 dBu I/P 1kHz Burst Tone used for all recorded measurements.
  • Fast (TC1): Attack 180µS — 1.8mS // Release 100mS – 150mS
  • MedFast (TC2): Attack 750µS – 5.25mS // Release 160mS – 250mS
  • Med (TC3): 2.7mS – 18mS // Release 350mS – 525mS
  • MedSlow (TC4): 4.6mS – 38mS // Release 600mS – 1 S
  • Slow (TC5): 11mS – 72.5mS // Release 800mS – 1.25 S
  • Auto (TC6): 5.75mS – 35.5mS // Release T1 400mS – 850mS, T2 TBD
  • “Fast” Mode Multiplier: Modifies aforementioned TC’s by 70% of original value

PRODUCT DIMENSIONS
19” (48.3 cm) x 10.5” (26.7 cm) x 1.75” (4.4 cm)

You read that right! Any orders over $30 ship for free!*

The CME Difference:  CME's mission is to make sure your shipment will arrive quickly, carefully, and correctly. We realize that the online ordering of guitars and instruments, in general, can be a nerve-racking experience. We are here to put your mind at ease and make your transaction smooth and enjoyable! As musicians ourselves, we want to make sure everything gets to you the way it should, every time.

Most orders ship the same or next day:  
We greatly appreciate your patience, and are working hard to fulfill all requests as quickly as possible, while practicing recommended safety guidelines.

Our Bottom line: We care! This is something we take very seriously, because it's what you deserve. Our shipping, sales, and customer service teams are always striving to create the best experience for you. If you have any questions, comments, or concerns, we want to know.

Please don't hesitate to reach out to support@chicagomusicexchange.com, or call us directly at 773-525-7773.

*Special exceptions do apply.

The CME Showroom is Open!

Our maximum capacity is 50 people. Per Illinois mandate, we require a mask be worn for entry, and during the length of your visit. Please observe social distancing guidelines while in the store. Thank you for your cooperation.



STORE HOURS (CST)

CLOSED Mon

day
12PM-7PM Tues-Friday

10AM-7PM Saturday

11AM-5PM Sunday

Scheduling an appointment is preferred, but we are taking walk-ins. For more details, give us a call at (773) 525-7773


Before & After Hours: Try us!
If we are not available, our commitment is to get back to you no later than the next day.


US & International: +1 (773) 525-7773


Fax: 773-525-2775



LOCATION 

3316 N Lincoln Avenue Chicago, IL 60657


We're right off the CTA Brown Line 'Paulina' Stop Just North of Belmont and just West of Ashland.

We’re all musicians here at Chicago Music Exchange and we want you to love the gear you get from us. We understand that sometimes you get a piece of gear that doesn’t work out for you. That’s why we offer an easy return policy to take the stress out of purchasing from us.

If you decide you'd like to return an item, please contact your Sales Rep, chat us, or give us a call.

If you placed your order on Amazon or eBay, we advise issuing the return request from your account on the platform of purchase - our Customer Service team will process a refund upon receipt of the item(s).

Most new items may be returned within 30 days of delivery and most vintage & used items may be returned within 3 days of delivery for a full refund, exchange, or store credit. Please pack the product safely for the journey back to us. If the product was shipped for free, the charge will be deducted from refund, unless the reason for the return is outside normal circumstances.

Please contact us as soon as possible if your order was received incorrectly, damaged, or defective. Most times we will give you an RA number (Return Authorization). Why is that number important? This will allow us to speed up the process of the return.

We reserve the right to charge a restocking fee based on the return condition. Some items we just can’t take back for returns, due to a one time function like strings or drums heads and other times it’s not sanitary to do so with microphones or harmonicas. If you aren’t sure if what you bought falls into a category like this, call us (773) 525-7773!

We strive to get your return processed quickly. Most of the time we have it done within two business days. Funds going back to credit cards usually takes two to four business days. CME strives to make sure all customers are happy with their experience. It is our priority to provide great service along with great gear. We always want to be helpful, and open to your feedback. Please let us know your thoughts! If you have any questions, we’re here for you!

Feel free to email us at customerservice@chicagomusicexchange.com or give us a call at (773) 525-7773.